Page 1 of 1
Five removable beams Stock Photos and Images
Model of the Bed of a 20-cm Sea Service Mortar on a Pivoting Undercarriage, Model of a mortar chair for mortar of 20 inches (cm) on swivel bed. The swivel bed consists of a flat wooden plate with a hole for the spindle bolt in the middle. At the rear is a fixed buffer beam with five removable beams, which serve as a buffer for absorbing the recoil, small spools are arranged between these beams, alternately at the ends or in the middle, through which the beams can spring. The chair consists of two parts placed in the direction of the layers and has taps made entirely of brass, a trough for Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-the-bed-of-a-20-cm-sea-service-mortar-on-a-pivoting-undercarriage-model-of-a-mortar-chair-for-mortar-of-20-inches-cm-on-swivel-bed-the-swivel-bed-consists-of-a-flat-wooden-plate-with-a-hole-for-the-spindle-bolt-in-the-middle-at-the-rear-is-a-fixed-buffer-beam-with-five-removable-beams-which-serve-as-a-buffer-for-absorbing-the-recoil-small-spools-are-arranged-between-these-beams-alternately-at-the-ends-or-in-the-middle-through-which-the-beams-can-spring-the-chair-consists-of-two-parts-placed-in-the-direction-of-the-layers-and-has-taps-made-entirely-of-brass-a-trough-for-image261381928.htmlRMW56Y8T–Model of the Bed of a 20-cm Sea Service Mortar on a Pivoting Undercarriage, Model of a mortar chair for mortar of 20 inches (cm) on swivel bed. The swivel bed consists of a flat wooden plate with a hole for the spindle bolt in the middle. At the rear is a fixed buffer beam with five removable beams, which serve as a buffer for absorbing the recoil, small spools are arranged between these beams, alternately at the ends or in the middle, through which the beams can spring. The chair consists of two parts placed in the direction of the layers and has taps made entirely of brass, a trough for
Model of the Bed of a 20-cm Sea Service Mortar on a Pivoting Undercarriage, Rijkswerf Amsterdam, 1855 demonstration model Model of a mortar chair for Mortier of 20 inches (cm) on rotary bed. The rotary bed consists of a flat wooden plate with hole for the pivot bolt in the middle. On the back is a fixed bump with five removable beams that serve as a buffer for taking care of the recoil; Small bobbins have been applied between these beams, turns at the ends or in the middle, so that the beams can feathers. The chair consists of two parts -placed parts and has tap cushions entirely of brass, a t Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-the-bed-of-a-20-cm-sea-service-mortar-on-a-pivoting-undercarriage-rijkswerf-amsterdam-1855-demonstration-model-model-of-a-mortar-chair-for-mortier-of-20-inches-cm-on-rotary-bed-the-rotary-bed-consists-of-a-flat-wooden-plate-with-hole-for-the-pivot-bolt-in-the-middle-on-the-back-is-a-fixed-bump-with-five-removable-beams-that-serve-as-a-buffer-for-taking-care-of-the-recoil-small-bobbins-have-been-applied-between-these-beams-turns-at-the-ends-or-in-the-middle-so-that-the-beams-can-feathers-the-chair-consists-of-two-parts-placed-parts-and-has-tap-cushions-entirely-of-brass-a-t-image590721571.htmlRM2W91KAY–Model of the Bed of a 20-cm Sea Service Mortar on a Pivoting Undercarriage, Rijkswerf Amsterdam, 1855 demonstration model Model of a mortar chair for Mortier of 20 inches (cm) on rotary bed. The rotary bed consists of a flat wooden plate with hole for the pivot bolt in the middle. On the back is a fixed bump with five removable beams that serve as a buffer for taking care of the recoil; Small bobbins have been applied between these beams, turns at the ends or in the middle, so that the beams can feathers. The chair consists of two parts -placed parts and has tap cushions entirely of brass, a t
Model of the Bed of a 20-cm Sea Service Mortar on a Pivoting Undercarriage, Model of a mortar chair for mortar of 20 inches (cm) on swivel bed. The swivel bed consists of a flat wooden plate with a hole for the spindle bolt in the middle. At the rear is a fixed buffer beam with five removable beams, which serve as a buffer for absorbing the recoil, small spools are arranged between these beams, alternately at the ends or in the middle, through which the beams can spring. The chair consists of two parts placed in the direction of the layers and has taps made entirely of brass, a trough for the Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-the-bed-of-a-20-cm-sea-service-mortar-on-a-pivoting-undercarriage-model-of-a-mortar-chair-for-mortar-of-20-inches-cm-on-swivel-bed-the-swivel-bed-consists-of-a-flat-wooden-plate-with-a-hole-for-the-spindle-bolt-in-the-middle-at-the-rear-is-a-fixed-buffer-beam-with-five-removable-beams-which-serve-as-a-buffer-for-absorbing-the-recoil-small-spools-are-arranged-between-these-beams-alternately-at-the-ends-or-in-the-middle-through-which-the-beams-can-spring-the-chair-consists-of-two-parts-placed-in-the-direction-of-the-layers-and-has-taps-made-entirely-of-brass-a-trough-for-the-image349985315.htmlRF2B9B5RF–Model of the Bed of a 20-cm Sea Service Mortar on a Pivoting Undercarriage, Model of a mortar chair for mortar of 20 inches (cm) on swivel bed. The swivel bed consists of a flat wooden plate with a hole for the spindle bolt in the middle. At the rear is a fixed buffer beam with five removable beams, which serve as a buffer for absorbing the recoil, small spools are arranged between these beams, alternately at the ends or in the middle, through which the beams can spring. The chair consists of two parts placed in the direction of the layers and has taps made entirely of brass, a trough for the
Model of the Bed or a 20-cm Sea Service Mortar on a Pivotos Undercarriage. Model of a mortar chair for mortar of 20 inches (cm) on turning bed. The spin bed consists of a flat wooden plate with hole for the spindle bolt in the middle. A fixed bucket with five removable beams is arranged on the back, which serve as a buffer for collecting the recoil; Little bobbins are arranged between these beams, turning at the ends or in the middle, allowing the beams. The seat consists of two parts placed in a layer direction and has tap cushions entirely of brass, a trough for the mortar in the sacrifice a Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-the-bed-or-a-20-cm-sea-service-mortar-on-a-pivotos-undercarriage-model-of-a-mortar-chair-for-mortar-of-20-inches-cm-on-turning-bed-the-spin-bed-consists-of-a-flat-wooden-plate-with-hole-for-the-spindle-bolt-in-the-middle-a-fixed-bucket-with-five-removable-beams-is-arranged-on-the-back-which-serve-as-a-buffer-for-collecting-the-recoil-little-bobbins-are-arranged-between-these-beams-turning-at-the-ends-or-in-the-middle-allowing-the-beams-the-seat-consists-of-two-parts-placed-in-a-layer-direction-and-has-tap-cushions-entirely-of-brass-a-trough-for-the-mortar-in-the-sacrifice-a-image430878097.htmlRM2G105BD–Model of the Bed or a 20-cm Sea Service Mortar on a Pivotos Undercarriage. Model of a mortar chair for mortar of 20 inches (cm) on turning bed. The spin bed consists of a flat wooden plate with hole for the spindle bolt in the middle. A fixed bucket with five removable beams is arranged on the back, which serve as a buffer for collecting the recoil; Little bobbins are arranged between these beams, turning at the ends or in the middle, allowing the beams. The seat consists of two parts placed in a layer direction and has tap cushions entirely of brass, a trough for the mortar in the sacrifice a
Search Results for Five removable beams Stock Photos and Images (4)
Page 1 of 1