Model of an Ironclad Ram Ship, Polychromed and witnessed block model of a ram tower ship, the floorboard is missing. It has the Rijkswapen in bow and mirror. The model has a ramsteven, a sharp cruiser fence, a rudder with a rounded blade, two two-leaf screws. It has two domes with two pieces each, there are two deck houses on the stern, connected by walkways, two between the two domes, also connected by walkways, a deck house at the bow. The railing can be lowered for shooting. The chimney stands on the front deck house between the domes, part of the railing there has cage entrenchment.

Model of an Ironclad Ram Ship, Polychromed and witnessed block model of a ram tower ship, the floorboard is missing. It has the Rijkswapen in bow and mirror. The model has a ramsteven, a sharp cruiser fence, a rudder with a rounded blade, two two-leaf screws. It has two domes with two pieces each, there are two deck houses on the stern, connected by walkways, two between the two domes, also connected by walkways, a deck house at the bow. The railing can be lowered for shooting. The chimney stands on the front deck house between the domes, part of the railing there has cage entrenchment. Stock Photo

RMID:W56WBN

Image details

Contributor:

Penta Springs Limited / Alamy Stock Photo

Image ID:

W56WBN

File size:

94 MB (1.1 MB Compressed download)

Releases:

Model - no | Property - noDo I need a release?

Dimensions:

6851 x 4798 px | 58 x 40.6 cm | 22.8 x 16 inches | 300dpi

Photographer:

More information:

This image could have imperfections as it’s either historical or reportage.

Model of an Ironclad Ram Ship, Polychromed and witnessed block model of a ram tower ship, the floorboard is missing. It has the Rijkswapen in bow and mirror. The model has a ramsteven, a sharp cruiser fence, a rudder with a rounded blade, two two-leaf screws. It has two domes with two pieces each, there are two deck houses on the stern, connected by walkways, two between the two domes, also connected by walkways, a deck house at the bow. The railing can be lowered for shooting. The chimney stands on the front deck house between the domes, part of the railing there has cage entrenchment. The model has five sloops in davits. The sheer is completely flat, the ship is a round truss. The model has a three-mast rig without sails, but neither the rig nor the chimney are original: they do not appear in old photos. The breeding mast and large mast are three-legged masts (Cole's system), the bezaansmast only has a fork, ship model, Prince Hendrik of the Netherlands (ship), Laird Brothers, Birkenhead (Merseyside), 1867, wood (plant material), brass (alloy), rope, h 91 cm × l 160 cm × w 38 cm

Search stock photos by tags

Similar stock images

RMW56WCE–Model of an Ironclad Ram Ship, Polychromed and witnessed block model of a ram tower ship, the floorboard is missing. It has the Rijkswapen on the mirror and gilt carving on the bow. The model has a flat deck, it has a ramsteven, round stern, rudder with rounded blade, and two two-leaf screws. The steering wheel is completely on the main deck, no superstructures have been built on the deck, apart from a number of little ramps and entrances, the turret with two cannons and a bridge between the turret and the chimney. The railing is double for cage extension. The model has five sloops in davits

RF2B9B480–Model of an Ironclad Ram Ship, Polychromed and witnessed block model of a ram tower ship, the floorboard is missing. It has the Rijkswapen on the mirror and gilt carving on the bow. The model has a flat deck, it has a ramsteven, round stern, rudder with rounded blade, and two two-leaf screws. The steering wheel is completely on the main deck, no superstructures have been built on the deck, apart from a number of little ramps and entrances, the turret with two cannons and a bridge between the turret and the chimney. The railing is double for cage extension. The model has five sloops in davits.

RM2W91R0P–Model of an Ironclad Ram Ship, R. Napier & Sons, 1868 ship model. fully rigged model. presentation model Polychromed and witnessed block model of a ram tower ship, the ground board is missing. It has the national weapon on the mirror and gilded cutting on the bow. The model has a flat deck; It has a ram stem, round stern, stir with a rounded leaf, and two two -blade screws. The steering wheel is completely behind the head deck; No buildings have been built on the deck, apart from a few roefjes and shuts, the gun umbrella with two cannons and a bridge between the dome and the chimney. The raili

RF2B9B471–Model of an Ironclad Ram Ship, Polychromed and witnessed block model of a ram tower ship, the floorboard is missing. It has the Rijkswapen in bow and mirror. The model has a ramsteven, a sharp cruiser fence, a rudder with a rounded blade, two two-leaf screws. It has two domes with two pieces each, there are two deck houses on the stern, connected by walkways, two between the two domes, also connected by walkways, a deck house at the bow. The railing can be lowered for shooting. The chimney stands on the front deck house between the domes, part of the railing there has cage entrenchment. The mo

RM2W91R13–Model of an Ironclad Ram Ship, Laird Brothers, 1868 ship model. fully rigged model. presentation model Polychromed and witnessed block model of a ram tower ship, the ground board is missing. It has the national weapon on bow and mirror. The model has a ramsteven, cruiser fence with balance stirrer, steering wheel on the Campanjedek completely behind with two compass houses, two two -leaf screws. On the main deck are two triangular deck buildings, one rear and one that allow a maximum scooter field for the two pieces in the rotating dome; The railing can be lowered before shooting. The chimney

RMW56WCM–Model of an Ironclad Ram Ship, Polychromed and witnessed block model of a ram tower ship, the floorboard is missing. It has the Rijkswapen in bow and mirror. The model has a ram's stern, crutch fence with balance rudder, steering wheel on the rear of the campaign deck with two compass housings, two two-leaf screws. On the main deck there are two triangular deck superstructures, one at the rear and one at the front, which allow a maximum field of fire for the two pieces in the revolving dome, the railing can be lowered for shooting. The chimney stands on the rear deck house just behind the dome

RF2B9B481–Model of an Ironclad Ram Ship, Polychromed and witnessed block model of a ram tower ship, the floorboard is missing. It has the Rijkswapen in bow and mirror. The model has a ram's stern, crutch fence with balance rudder, steering wheel on the rear of the campaign deck with two compass housings, two two-leaf screws. On the main deck there are two triangular deck superstructures, one at the rear and one at the front, which allow a maximum field of fire for the two pieces in the revolving dome, the railing can be lowered for shooting. The chimney stands on the rear deck house just behind the dome

RM2W91PNB–Model of an Ironclad Ram Ship, Laird Brothers, 1867 ship model. fully rigged model. presentation model Polychromed and witnessed block model of a ram tower ship, the ground board is missing. It has the national weapon on bow and mirror. The model has a ram sting, a sharp cruiser fence, stir with a rounded leaf, two two -blade screws. It has two domes with two pieces each; There are two decks on the stern, connected by bangs, two between the two umbrella organizations, also connected by bangs, a deck house by the bow. The railing can be lowered before shooting. The chimney is on the front deck

RM2W91RB3–Half Model of An IronClad Ram Ship, Rijkswerf Amsterdam, c. 1867 - c. 1870 ship model. half model. builder's model Polychromed stacking model and half -model (starboard) of a ram tower ship. It has a rounded ramsteven, decorated with leaf motifs at the top, a cruiser fence with lights and cutting of tendrils, a rudder with rounded rudder leaf and one of a pair of three -leaf screws with adjustable urgency. On the deck is a single dome with large round Liège and two round ranking dome; Behind the dome the bridge with a gangboard with gratings cross -ship, a chimney, two covered shifts on the st

RM2F243CY–Half model or an ironclad ram ship. Polychromed stack model and semi-model (starboard) of a ram tower vessel. It has a rounded ramsteven, decorated with leaf motifs at the top, a cruiser gate with lights and carving of tendrils, a stir with rounded stirring blade and one of a pair of three-leaf screws with adjustable urgency. On the deck is a single gun dome with a large area of hatch and two round target domes; Behind the dome the bridge with a gangway with grilles cross-shears, a chimney, two chattered crosses on the stern and spread over the deck different cupboards. A mast on the fore sh

RM2G22J89–Model of An IronClad Ram Ship. Polychromed and witnessed block model of a ram tower vessel, the base board is missing. It has the government arms on the mirror and gold-plated carving. The model has a flat deck; It has a ramsteven, round steering, stir with rounded leaves, and two double-leaf screws. The steering wheel stands entirely on the main deck; No build-up are built on the deck, apart from a few roasts and strips, the gunpost with two cannons and a bridge between the dome and the chimney. The railing is double for cage beverage. The model has five sloops in Davits. The seam is complete

RM2G22GF7–Model of An IronClad Ram Ship. Polychromed and witnessed block model of a ram tower vessel, the base board is missing. It has the national arms on a bow and mirror. The model has a ramsteven, a sharp cruiser gate, stir with rounded sheet, two double-leaf screws. It has two dome with two pieces each; There are two deck stores on the stern, connected by running corridors, two between the two domes, also connected by walking corridors, a deck house by the bow. The railing can be lowered before shooting. The chimney stands on the front deck house between the domes, part of the railing there has ca