Model of a Gun and Carriage on a Ship Deck, Model of a gun on a horse on a sloping deck with board on the low side. The wooden barrel is 26 cm long. The rolling horse, narrower at the rear, consists of two cheeks with four steps and an arched cut-out at the bottom, which are connected by the calf, a breast piece, a crossbar in the middle, the soleplate and a bar under the soleplate, and the ashes. The adjusting wedge is missing. The wheels are made of wood and the front wheels are larger than the rear wheels. There is a mechanism in the deck above which hooks under the rear axle body of

Model of a Gun and Carriage on a Ship Deck, Model of a gun on a horse on a sloping deck with board on the low side. The wooden barrel is 26 cm long. The rolling horse, narrower at the rear, consists of two cheeks with four steps and an arched cut-out at the bottom, which are connected by the calf, a breast piece, a crossbar in the middle, the soleplate and a bar under the soleplate, and the ashes. The adjusting wedge is missing. The wheels are made of wood and the front wheels are larger than the rear wheels. There is a mechanism in the deck above which hooks under the rear axle body of Stock Photo

RMID:W56YJH

Image details

Contributor:

Penta Springs Limited / Alamy Stock Photo

Image ID:

W56YJH

File size:

78.1 MB (882 KB Compressed download)

Releases:

Model - no | Property - noDo I need a release?

Dimensions:

6415 x 4257 px | 54.3 x 36 cm | 21.4 x 14.2 inches | 300dpi

Photographer:

More information:

This image could have imperfections as it’s either historical or reportage.

Model of a Gun and Carriage on a Ship Deck, Model of a gun on a horse on a sloping deck with board on the low side. The wooden barrel is 26 cm long. The rolling horse, narrower at the rear, consists of two cheeks with four steps and an arched cut-out at the bottom, which are connected by the calf, a breast piece, a crossbar in the middle, the soleplate and a bar under the soleplate, and the ashes. The adjusting wedge is missing. The wheels are made of wood and the front wheels are larger than the rear wheels. There is a mechanism in the deck above which hooks under the rear axle body of the horse and holds it up, this mechanism can move back and forth in a cut-out circle segment, thus changing the angle at which the rolling horse, once released, will roll downwards. Where the horse comes against the collar, the collar is reinforced with a cushion block on the inside., Jochem Pietersz. Asmus, Amsterdam, 1796, wood (plant material), brass (alloy), gun and carriage: h 15.7 cm × w 26 cm × d 13.5 cm ship deck: h 9.5 cm × w 37 cm × d 31.5 cm

Search stock photos by tags

26 board carriage gun horse low side model ship deck sloping deck wooden barrel

Similar stock images

RMW56Y9W–Model of a Carriage for a 4-Pounder Gun, Model of a gun for a 4-pound gun for use on land and on a ship, the loop itself is missing, as well as some attributes. The central body consists of two cheeks connected by a long soleplate and a calf. The adjusting wedge runs in a groove in the soleplate, where it cannot be lifted, a rack is mounted below the wedge so that the wedge is moved forward and backward with a crank with an endless screw. In the fieldaffaff composition, the cheeks are extended to the rear with a tail, which is attached with brackets, with a spindle hole. An ash body is slid

RM2W91KK8–Model of a Carriage for a 4-Pounder Gun, Jochem Pietersz. Asmus (possibly), 1800 demonstration model Model of a canon for a cannon of 4 pounds for use on land and on a ship; The course itself is missing, as well as some attributes. The central body consists of two cheeks connected by a long sole plate and a calf. The Stelwig runs in a groove in the sole plate, where it cannot be eliminated; At the bottom of the wedge, a hug is mounted so that the wedge is moved forward and backwards with a crank with a screw-without-end. In the composition of Veldaffuit, the cheeks are extended to the rear wit

RF2B9B5WD–Model of a Carriage for a 4-Pounder Gun, Model of a gun for a 4-pound gun for use on land and on a ship, the loop itself is missing, as well as some attributes. The central body consists of two cheeks connected by a long soleplate and a calf. The adjusting wedge runs in a groove in the soleplate, where it cannot be lifted, a rack is mounted below the wedge so that the wedge is moved forward and backward with a crank with an endless screw. In the fieldaffaff composition, the cheeks are extended to the rear with a tail, which is attached with brackets, with a spindle hole. An ash body is slid th

RFTRMPY9–Reduced ship model. Fragment of the deck of a pirate sailing ship with a cannon on a rotating gun carriage and a lifeboat

RFT93HAC–Old battle canon on the ship somewhere in the Russia

RMW56W7R–Model of a 60-Pounder Muzzle-Loading Gun with Loading Gear, Model of a long cannon of 60 pounds on a sliding carriage, with a new design of loading equipment, on ship part with artillery gate, incomplete. The model is, except for some metal parts, completely painted black. The wooden barrel is 35.8 cm long and has a caliber of 20.5 mm, it is provided with a lock elevation and a visor holder on the tap piece. The body consists of two cheeks with four steps, connected by two axle bodies without wheels, and a soleplate. The gun gate is oval. The loading equipment is attached to the barrel

RM2W91MGA–Model of a Gun and Carriage on a Ship Deck, Jochem Pietersz. Asmus, 1796 gunmodel. demonstration model Model of a cannon on a roller horse on a sloping deck with on the low side. The wooden loop is 26 cm long. The role horse, for narrower than behind, consists of two cheeks with four stairs and an arc -shaped cut underneath, which are connected by the calf, a breastpiece, a crossbar in the middle, the sole plate and a beam under the sole plate, and the ash bodies. The Stelwig is missing. The wheels are made of wood and the front wheels are larger than the rear wheels. In the deck is applied ab

RF2B9B3R2–Model of a Gun Position on the Afterdeck, Model of the aft deck of a paddle steamer with rotating slide, incomplete. There is no guns and top reflux. The bottom carriage consists of a wooden frame, rotating over the turning circles on balls in the corners. The rear part of the carriage is hinged on the deck and must be folded up to allow the carriage to turn. The model specifically shows the removable back piece of the railing, consisting of pieces of pot lid, supports and skin segments. The front part is fixed and has cage extension. 1:20 scale (derived), Phoenix (ship), Rijkswerf Rotterdam,

RM2F24D1T–Model of a Gun Position on the Afterdeck.Model of the aft deck of a paddle steam ship with a swivel, incomplete. Beschut and upperfuit are missing. The underlay consists of a wooden frame, running over the turning races on bullets in the corners. The rear of the carriage is fixed with hinges on deck and must be folded up to give the slide the option to turn. The model specifically shows the removable backline of the railing, consisting of pieces of pot lid, supports and skin segments. The front part is fixed and has cage beverage. Scale 1:20 (derived).

RFT93HCB–Old battle canon on the ship somewhere in the Russia

RM2F24HKW–Model of a Carriage for a 4-pounder gun.Model from an affit for a gun of 4 pounds for use to land and on a ship; The course itself is missing, as well as a few attributes. The central body consists of two cheeks connected by a long soleplate and a calf. The Stelwig runs into a groove in the soleplate, where it cannot be scanned; Under against the wedge, a rack is mounted so that the wedge is moved forward and backwards with a crank with a screw-without end. In the composition of field ratter, the cheeks are extended to a tail, which is attached with brackets, with spindle hole. An asgle is pus

RM2F24BTT–Model of AN 80-pounder Shell Gun on a Pivot on a Ship Deck. Model of a 80 pound bomb gun on a swiveled piece, painted black. The wooden loop is 55 cm long, has a 44 mm caliber and fittings for a visor at the trumpery and at the tap band; Zundgat with lock hardening, grape as a pairing ring. The upper carriage, slightly narrower, has two cheeks with three stages, the tops of which are with the tapping of solid brass. The cheeks are connected by a sloping calf, a crossbar in the middle and the axis; The sole plate is on the crossbar and the rear asx. The aneslives have no wheels, but slide over

RM2RC94GX–Manufacturing process at Ohio Steel Foundry Co. in Lima, Ohio for top and bottom gun carriages used for the 155 m/m gun. The bottom gun carriages for the Filleaux model 1918 are annealed and ready for shipping. This photograph was taken on September 10, 1918. It is for official use only.