Graham Pattle and Mark Burton's Green and Cream, 1965, Ford Lotus Cortina, during the Adrian Flux Trophy for Transatlantic Pre'66 Touring Cars Race
Image details
Contributor:
John Gaffen / Alamy Stock PhotoImage ID:
2WXTAG8File size:
38.2 MB (1 MB Compressed download)Releases:
Model - no | Property - noDo I need a release?Dimensions:
4620 x 2888 px | 39.1 x 24.5 cm | 15.4 x 9.6 inches | 300dpiDate taken:
27 August 2023Location:
Silverstone Circuit, Towcester, Northamptonshire, NN12 8TNMore information:
Lotus Cortina is the commonly used term for the Ford Cortina Lotus, a high-performance sports saloon, which was produced in the United Kingdom from 1963 to 1970 by Ford in collaboration with Lotus Cars. The original version, which was based on the Ford Cortina Mark 1, was promoted by Ford as the "Consul Cortina developed by Lotus", with "Consul" later being dropped from the name. The Mark 2 was based on the Ford Cortina Mark II and was marketed by Ford as the "Cortina Lotus". Lotus gave the model the type number designation Type 28. There were 3, 306 Mark I and 4, 093 Mark 2 Lotus Cortinas produced.The history of the Cortina Lotus began in 1961. Colin Chapman had been wishing to build his own engines for Lotus, mainly because the Coventry Climax unit was so expensive. Colin Chapman's chance came when he commissioned Harry Mundy (a close friend and designer of the Coventry Climax engine and technical editor for Autocar) to design a twin-cam version of the Ford Kent engine. Most of the development of the engine was done on the 997cc and 1, 340cc bottom end, but in 1962 Ford released the 116E five bearing 1, 498 cc engine and work centred on this. Keith Duckworth, from Cosworth, played an important part in tuning of the engine. The engine's first appearance was in 1962 at the Nürburgring in a Lotus 23 driven by Jim Clark. Almost as soon as the engine appeared in production cars (Lotus Elan), it was replaced with a larger capacity unit (82.55 mm bore to give 1, 557 cc). This was in order to get the car closer to the 1.6 litre capacity class in motorsport. Whilst the engine was being developed, Walter Hayes (Ford) asked Colin Chapman if he would fit the engine to 1, 000 Ford saloons for Group 2 homologation. Chapman quickly accepted, although it must have been very busy in the Cheshunt plant, with the Elan about to be launched. The Type 28 or Lotus Cortina or Cortina Lotus (as Ford liked to call it) was duly launched.